NAS-50HDE.GB.2-890-157-
11
(1)
1
GB
Tips
If any of the tracks are registered in the Trash
Bin of the “WALKMAN” (ATRAC AD), a
confirmation message will appear on the unit and
the “WALKMAN” (ATRAC AD).
If the playlist is transferred from the HDD
Jukebox to the “WALKMAN” (ATRAC AD), the
playlist will also be recognized as a playlist of the
“WALKMAN” (ATRAC AD).
Notes
If the AC power adaptor is supplied with the
connected device, it is recommended that you
operate the device on house current. When
operating the device on batteries, make sure the
remaining battery power is sufficient. We do not
guarantee against malfunctions, transfer failures,
or destruction of audio data caused by shortages in
battery power.
Make sure that you do not disconnect the USB
cable while transferring to a “WALKMAN”
(ATRAC AD). If you do, the unit or the
“WALKMAN” (ATRAC AD) may malfunction.
Transferring tracks to a USB storage
device
Note
Make sure you do not disconnect the USB cable
while transferring tracks to a USB storage device.
If you do, the unit or the USB storage device may
malfunction.
1
Connect the USB storage device to a
USB connecting jack on the unit.
Refer to the operating manual of the
USB storage device as well.
2
Enter the Function menu and select
[HDD JUKEBOX].
Make sure the TRANSFER button is set
to USB storage device (page 49).
3
Select the albums, playlists, or tracks
that you want to transfer.
4
Press TRANSFER on the remote
control or the unit.
5
If the drive selection display appears,
select the drive.
If the connected USB storage device
has only one drive, the drive selection
display does not appear.
6
Make sure the selected tracks are
checked
.
Uncheck the tracks that you do not
want to transfer.
7
Select [Setting].
A display appears for setting the
destination folder in the USB storage
device.
8
Select [Select folder at destination],
and then select the destination folder
from the pull-down menu.
Standard
setting
Tracks are saved to “\\Music”
folder.
Root
setting
Tracks are saved to the root
directory of the destination.
Select
Enter the folder name.
(
Factory setting)
9
Select [Close].
The unit returns to the USB storage
transfer display.
10
Select [Execute] or press TRANSFER.
