NAS-50HDE.GB.2-890-157-
11
(1)
GB
Tips
If you experience noise in an FM stereo broadcast,
enter the Option menu and select [Setting] – [FM
mode] – [Monaural]. The reception will no longer
be stereo, but it will be clearer. To change back to
stereo reception, do the same procedure and select
[Auto stereo].
For better broadcast reception, try changing the
direction or location of the antenna. For example,
position the antenna near or outside a window. If
the reception does not improve, it is recommended
to connect a commercially available external
antenna.
Receiving a DAB service (UK model only)
Before you can receive DAB services,
the broadcast components (service
components) must first be registered
by conducting a DAB Auto Scan (see
“Performing DAB Auto Scan” on page 23).
Press DAB, or enter the Function menu
and select [DAB].
The DAB main display appears and the
unit starts receiving the services.
Other operations
To
Do the following:
Select different
services
Press
/
repeatedly
to select the desired service.
Press
to display the
service component list, press
/
to select the desired
service, and then press
ENTER.
Press the corresponding
numeric button to select the
service number (or preset
number) of the desired
service.
Switch between
the primary
and secondary
components
Press
/
.
To
Do the following:
Switch between
“auto tuning”
and “preset
tuning”*
Enter the Option menu and
select [Mode switch].
* When you switch from “auto tuning” to “preset
tuning”:
The unit changes to the preset tuning display
and begins receiving the service for the last
preset number used.
“No preset” appears in the preset tuning display
if the last preset number used was cleared.
About the DAB reception display
Name of service
Service Label and frequency
Dynamic Label Segment
Ensemble Label
About DAB service component list
Service number
