113
Tr
oub
le
sh
o
o
ting
Warning indicators and messages
When an error occurs, a warning indicator
appears on the LCD screen or in the
viewfinder.
You can fix some problems associated with
the symptoms yourself. If the problem
persists even after you have tried a couple
of times, contact your Sony dealer or local
authorized Sony service facility.
C:(or E:)
ss
:
ss
(Self-diagnosis
display)
C:04:
ss
• The battery pack is not an
“InfoLITHIUM” battery pack. Use an
“InfoLITHIUM” battery pack (p. 120).
C:06:
ss
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
C:21:
ss
• Moisture condensation has occurred.
Remove the cassette and leave your
camcorder for at least 1 hour, then re-
insert the cassette (p. 123).
C:22:
ss
• Clean the head using a cleaning
cassette (optional) (p. 124).
C:31:
ss
/ C:32:
ss
• Symptoms that are not described above
have occurred. Remove and insert the
cassette, then operate your camcorder
again. Do not perform this procedure if
moisture condensation has occurred
(p. 123).
• Remove the power source. Reconnect it
and operate your camcorder again.
• Change the cassette. Press the RESET
button (p. 134), and operate your
camcorder again.
E:61:
ss
/ E:62:
ss
• Contact your Sony dealer or local
authorized Sony service facility. Inform
them of the 5-digit code, which starts
from “E.”
101-1001(Warning indicator
pertaining to files)
• The file is damaged.
• The file is unreadable (p. 120).
E
(Battery level warning)
• The battery pack is nearly used up.
• Depending on the operating,
environment, or battery conditions,
E
may flash, even if there are
approximately 5 to 10 minutes
remaining.
(Warning indicator pertaining
to battery pack temperature)
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
%
(Moisture condensation warning)*
• Eject the cassette, remove the power
source, and then leave it for about 1
hour with the cassette lid open (p. 123).
Q
(Warning indicators pertaining to
the tape)
Slow flashing:
• There is less than 5 minutes remaining
on the tape.
• No cassette is inserted.
*
• The write-protect tab on the cassette is
set to lock (p. 116).
*
Fast flashing:
• The tape has run out.
*
Self-diagnosis display/Warning
indicators
Continued
,
Summary of Contents for DSR-PD198P
Page 445: ......
