6-21
HVR-Z5C/Z5E/Z5J/Z5N/Z5P/Z5U
27. C8 Page table
Note 1:
If reading/writing data on pages C8, set data: 0C to page:
0, address: 10, and then select pages: 8. By this data set-
ting, the pages C8 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
28. C9 Page table
Note 1:
If reading/writing data on pages C9, set data: 0C to page:
0, address: 10, and then select pages: 9. By this data set-
ting, the pages C9 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
29. CA Page table
Note 1:
If reading/writing data on pages CA, set data: 0C to page:
0, address: 10, and then select pages: A. By this data set-
ting, the pages CA can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
30. CB Page table
Note 1:
If reading/writing data on pages CB, set data: 0C to page:
0, address: 10, and then select pages: B. By this data set-
ting, the pages CB can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to DF
Fixed data-1 (Initialized data)
31. CC Page table
Note 1:
If reading/writing data on pages CC, set data: 0C to page:
0, address: 10, and then select pages: C. By this data set-
ting, the pages CC can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to C7
Fixed data-1 (Initialized data)
Summary of Contents for DSR-PD198P
Page 445: ......
