Sony DSR-570WS, Service Manual, Page: 78 / 250

3-10 DSR-570WS/570WSP V1
DISP SELECT
This item is used for switching the contents of error item detail
display.
1. The latest error check result is displayed.
2. The item which diagnosed as an error in the past by means of
automatic self-diagnosis function is displayed.
PP-PMPD
This item shows a detail of the sync signal input check result and
internal RAM check result of PP LSI (IC210 on the DPR board).
800H: PP LSI’s internal RAM error
002H: HD signal input to PP LSI (pin 102 of IC210/DPR board) error
001H: VD signal input to PP LSI (pin 101 of IC210/DPR board) error
n
If there is a plural error, the sum of each error code is displayed as three
digits hexadecimal notation.
(If there are errors in both HD and VD signals, 003H is displayed on the PP-
PMPD.)
PR-PMPD1
This item shows a detail of the sync signal input check result of PR
LSI (IC216 on the DPR board).
002H: HD signal input to PR LSI (pin 74 of IC216/DPR board) error
001H: VD signal input to PR LSI (pin 73 of IC216/DPR board) error
PR-PMPD2
This item shows a detail of the internal RAM check result of PR LSI
(IC216/DPR board).
800H: PR LSI’s internal RAM error
PR-G2
Not in use
PR-R2
Not in use
.....
Page 22 Self Diagnosis 2
ERROR DISP 1/3
DISP SELECT
PP-PMPD
PR-PMPD1
PR-PMPD2
PR-G2
PR-R2
1
000H
000H
000H
000H
000H
:
:
:
:
:
:
PAGE 22 (NEXT PREV )
EXIT MENU (YES PUSH)
3-5. Self Diagnosis
The self diagnosis can be performed with service mode operation.
Refer to section 4-2-1 for the operating procedure of the service mode.