Sony DSR-570WS, Service Manual

Page: 65 / 250

2-47 DSR-570WS/570WSP V1
3. Press the RESET (MENU SET) button once.
Check that the following message will be displayed on
the display window (LCD).
If “no” is displayed on the display window (LCD), exit
from Menu No. 752 once, and perform the above
procedure again. If the display does not change, check
if the peripheral circuits of EEPROM (IC204) of the
FP-118A board are abnormal, and replace with the
EEPROM attached to the old board.
4. Press the MENU button to exit from the maintenance
menu. The display window (LCD) will return to the
state before the maintenance menu was displayed.
2-18-5. Adjustment and Setting Items After Boards are Replaced
When the following boards are replaced, implement the specified adjustments and checks.
The boards that are specified below do not require adjustments and checks when they are replaced.
Board Adjustment and setting items Menu items Section to be
referred to
CCD unit Camera System Electrical Alignment — 9-1-4
Memory Backup Service menu Page 21 4-2-3
DPR-141B Memory Backup Service menu Page 21 4-2-3
Serial Setting System setting menu No. 52 4-1-2
VA EEPROM (SY) Initialize Maintenance menu No. 750 4-1-3
ES-26/26P Memory Backup Service menu Page 21 4-2-3
FP-118A KY EEPROM Echo Back Data Preset Maintenance menu No. 752 2-18-4
4-1-3
HN-227 Replace the IC1 — 2-9-9
RP-91 AUTO EQ Adjustment Maintenance menu No. 704 4-1-3
10-3-4
TG-204 Input the CCD block number Service menu Page 13 4-2-3