
6-17
DSR-570WS/570WSP V1
6-13. Replacement of Shift Motor
Assembly
The shift motor assembly can be replaced with the
cassette compartment attached.
Mode: Unthreading end
Removal
1. Remove the SV-213 board.
(Refer to Section 2-9-8.)
2. Pull out the harness from the CN514 connector
of the HN-227 board shown in the figure.
3. Pull out the harness from the CN1 connector of
the CC-86 board shown in the figure.
4. Remove the two screws and remove the shift
motor assembly.
Attachment
5. Adjust the new shift motor to the two protrusions
shown in the figure, and attach with the two
screws.
6. Attach the harness and SV-213 board in the
reverse order of steps 1 to 3.
HN-227 board
Harness
CN514
CC-86 board
Harness
Shift motor assembly
Screw
Cassette compartment
Screw
Protrusions
CN1
Summary of Contents for DSR-570WS
