1-15
CCU-TX7 (E)/V1
12
For the customers in Europe
This product with the CE marking complies with the EMC
Directive (89/336/EEC) issued by the Commission of the
European Community.
Compliance with this directive implies conformity to the
following European standards:
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environment (s):
E1 (residential), E2 (commercial and light industrial), E3
(urban outdoors) and E4 (controlled EMC environment
ex. TV studio)
Table of Contents
Overview ......................................................................... 12
Location and Function of Parts .................................... 13
Fitting and Adjustment ................................................. 14
Auto Level Adjustment ................................................. 17
Specifications ................................................................ 18
Overview
The DXBK-701 SDI Output Board is an option board for the
Sony CCU-TX7/TX7P Camera Control Unit. When this board
is fitted in a CCU-TX7/TX7P, it provides an SDI digital signal
output.
Note
This board can be fitted to a CCU-TX7 with serial number
11001 or greater or a CCU-TX7P with serial number 41001 or
greater.
When this board is fitted, the heat generated can cause burns.
Be sure to have the board fitted by your Sony dealer.
1)
1) Fitting the board to a CCU-TX7 with serial number 11000 or below or a
CCU-TX7P with serial number 41000 or below requires a separate
modification to the CCU-TX7/TX7P. Consult your Sony dealer about
this.
..........................................................................................................................
13
Location and Function of Parts
1
ALARM indicator
This lights red when the SDI signal is
not being output.
2
SDI output connectors
Connect the two cables from the
CCU.
3
AUTO LEVEL indicator
This lights green when the automatic
video level adjustment is carried out
correctly.
ALARM
SDI-44
ON
OFF
SDI POWER
AUTO LEVEL
(BARS)
4
AUTO LEVEL switch
With the output set to color bars, press
this switch to carry out automatic
video level adjustment.
5
SDI POWER switch
Set this to ON to use the SDI output.
When not using the SDI output, set to
OFF to conserve power.
1
ALARM indicator
2
SDI output connectors
3
AUTO LEVEL indicator
4
AUTO LEVEL switch
5
SDI POWER switch
