1-12
DFS-700/700P
Chapter 2 Location and Function of
Parts and Controls
2-12
Chapter 2 Location and Function of Parts and Controls
4
HOLD INPUT button
To hold the primary cross-point bus settings and the
auxiliary bus settings (signal selections) fixed when
recalling a snapshot, press this button. When you press
this button, it lights, and when you recall a snapshot,
the system is in the hold input mode. When you recall
a snapshot in this mode, all settings are recreated on
the control panel except those relating to the primary
cross-point bus and the auxiliary bus.
Press the button once more to turn it off and exit the
hold input mode.
qa
Location section
1
LOCATION button
Press this button to use the joystick and Z-knob. When
you press this button, it lights, and enables the joystick
and Z-knob.
Press the button once more to disable the joystick and
Z-knob, and return the effect pattern to its default
position.
Holding down the INITIAL button while pressing this
button returns the setting to its default value.
2
Joystick
Use the joystick to position the effect pattern in the x-
and y-directions.
3
Z-knob
Turn the Z-knob to move an effect pattern in the depth
direction (the z-axis). With this you can change the
effective size of the pattern.
LOCATION
1
LOCATION button
2
Joystick
3
Z-knob
qs
25-pin connector (rear panel)
Use the supplied 25-pin control cable to connect this to
the PANEL connector on the processor unit.
Control Panel
Chapter 2 Location and Function of
Parts and Controls
Chapter 2 Location and Function of Parts and Controls
2-13
Processor Unit
Front Panel
Power indicator
Power switch
Power switch and indicator
This powers the unit on and off. Press the “ ” side of
the switch to power on, and the “
” side to power off.
When the power is on, the power indicator lights
amber.
Rear Panel
1
PGM OUT connectors
1
3
1
2
1
2
2
1
3
4
5
6
7
8
2
1
Y
COMPOSITE
PGM OUT
CLEAN
OUT
OPTION
SDI INPUT
PGM OUT
BLACK BURST OUT
VIDEO INPUT
COMPONENT
S VIDEO
COMPONENT/COMPOSITE
COMPONENT
DIGITAL I/O
ANALOG I/O
AC IN
2
R-Y
PVW
B-Y
6
5
Y/V
R-Y
B-Y
8
7
6/2
5/1
Y
R-Y
B-Y
8/4
7/3
2
1
REF.VIDEO IN
GPI/T
PANEL
TALLY
EDITOR
TERMINAL
DSK KEY IN
ON
OFF
OFF
75
Ω
ON
75
Ω
8
7
6
5
S VIDEO
(OPTION)
(OPTION)
2
1
2
VIDEO INPUT connectors
3
EDITOR
connector
4
PANEL connector
5
TALLY connector
6
TERMINAL connector
7
CLEAN OUT connector
8
PVW connector
9
BLACK BURST OUT 1 to 3
connectors
q;
DSK KEY IN connectors
and 75
Ω
terminator
switch
qa
REF. VIDEO IN connectors and 75
Ω
terminator switch
qs
GPI/T 1 and 2 connectors
qd
U
terminal
qf
-
AC IN connector
