Sonel PAT-806-IT, User Manual

Page: 36 / 76

PAT-806-IT
– USER MANUAL
34
It is also possible to perform measurement without the test socket - by using
the following sockets:
R
ISO
- and R
ISO
+ .
The measurement is performed similarly as in 4.5.1.
4.5.3 Three-point R
ISO
measurement on welding equipment
Keep pressing R
ISO
button, until the screen in-
forming about the readiness for measurement
is displayed.
When parameters must be changed press
SET . Setting is performed as in section 4.2.
Measurement parameters are set in the fol-
lowing order: U
ISO
a limit value for LN-PE
measurement
LN-PE measurement time
a limit value for LN-S measurement
LN-S measurement time a limit value for
PE-S measurement PE-S measurement
time, where S means shorted outputs of the
welding machine.