Sonel PAT-806-IT, User Manual

Page: 16 / 76

PAT-806-IT
– USER MANUAL
14
Use , to set
the operation of the
meter with the bar-
code reader ( ) or
without it ( ).
Press
ENTER , to confirm the set-
tings, or ESC , to exit to main MENU
without changing any settings.
Notes:
- The reader and printer have been programmed to read the codes in CODE128 standard (in PAT de-
vices we use digits only). PAT accepts only 7-character codes (e.g. "1234567"), any other are con-
sidered invalid. Therefore, if you attempt to read a 6-character code (or shorter) the reader will read it,
but PAT will not save it - the same applies to 8-character codes and longer.
- The bar-code contains only ID number of the device, no additional information is coded.
- Reader configuration:
1. Connect the reader to your PC.
2. Wait until the reader is installed on your system.
3. Point the reader at the following code pressing the button. The reader signals successful read-out
by lighting green LED and a beep.