Sonel PAT-806-IT, User Manual

Page: 44 / 76

PAT-806-IT
– USER MANUAL
42
4.9 Measurement of touch leakage current
It is recommended for checking the welding equipment to use the measurements: the
leakage current of the primary circuit and leakage current welding circuit.
Press I
T
. After that meter is prepared for
measurement.
Supply the tested device from mains socket other than PAT (for
Class I the socket must have PE). Additionally connect the probe
which will be used for touching accessible parts of the tested de-
vice (for parts of Class I accessible and not connected to PE).
Settings and measurements as in section 4.5.