Sonel PAT-806-IT, User Manual

Page: 26 / 76

PAT-806-IT
– USER MANUAL
24
Notes:
- Tested device must be turned on.
- R
L-N
measurement is intended for resistance objects, in case of inductive objects, the result may be
burdened with an additional errors.
- Fuse test is possible when
READY message is displayed.
- Do not touch the two metal ends of the fuse with your fingers during the test, because a blown fuse
may be diagnosed as good.
4.2 Measurement of protective lead resistance using 200 mA current
Keep pressing R
PE
button, until the screen in-
forming about the readiness for measurement
with 200 mA current is displayed.
When parameters must be changed press
SET .
Use , to set the upper limit of R
PE
resistance.