Copyright © 2013 Somfy SAS. All rights reserved.
6
Video door phone - V600 RTS
EN
INSTallINg ThE moNIToR
[1].
Fix the monitor mounting plate to the wall.
Important:
Ensure the direction of fitting is correct by positioning the arrow upwards ("
up
" facing upwards) as indicated on the illustration.
[2].
Remove the DC connector from the rear of the monitor and connect the cable from the power plug to this connector: black wire with white
lines on the left (+) and black wire on the right (-).
[3].
Connect the power plug connector to the DC input at the rear of the monitor in the direction indicated in the illustration (screws to the right);
the direction in which the wires are connected to the power plug is important.
Important:
It is essential to use the power plug provided to supply the monitor.
Prepare the monitor for connection to the door station by connecting a 2-wire cable to connector P1 at the rear of the monitor.
If you wish to install a second monitor, prepare the connection for this monitor by connecting 2 wires to the P2 connector at the rear of the
monitor, then refer to the guide for the second monitor for additional information on its wiring.
[4].
Clip the monitor onto its mounting bracket by first positioning the top of the monitor on the station, then the bottom.
Note:
Position the power plug wires between the mounting bracket and the monitor.
power plug wires
1
2
4
+
-
P1
M
-
M+
M
-
M+
P2
DC
+
-
P1
M
-
M+
M
-
M+
P2
DC
+
-
monitor
To the door station
To a second monitor
(optional)
3