13
Copyright © 2013 Somfy SAS. All rights reserved.
Video door phone - V600 RTS
EN
2 mn
2 s
2 s
5 s
5 s
P1
M
-M+
P2
DC
+
-
Caution:
The receiver uses a 230V power supply. For your safety, ensure that you do not touch the terminal or the bare wires.
Note:
The monitor can be disconnected from the power supply to carry out this operation.
[1].
Open the lighting receiver.
[2].
Check that the receiver is powered on.
[3].
Press the PROG button on the receiver until the indicator light on the receiver comes on. The programming function is activated for 2 minutes.
[4].
Select a free channel by pressing the channel selection button on the monitor.
[5].
Use a fine-tipped object to briefly press the PROG button at the back of the monitor (above the battery housing, no. 19, page 3).
The indicator light on the receiver flashes for 5 seconds.
1 2 3 4
4
3
5
Note:
To clear the video entry phone programming on a Somfy lighting receiver, repeat all the steps detailed above.
RTS outdoor lighting receiver
RTS indoor lighting receiver
►
programming a Somfy RTS lighting receiver