Copyright © 2013 Somfy SAS. All rights reserved.
14
Video door phone - V600 RTS
EN
►
programming a Somfy RTS radio roller shutter motorisation
Note:
The monitor can be disconnected from the power supply to carry out this operation.
[1].
Identify the original control of the roller shutter, i.e. the remote control or the control point which only controls this roller shutter.
Note:
- If the original control is lost or broken, and it is the only one to control the roller shutter, contact one of our Somfy advisors.
- If another control operates the roller shutter, use that to follow the steps below.
[2].
Partially open the roller shutter using the original control.
[3].
Press the PROG button on the original control until the roller shutter makes an up and down movement (or a series of 3 beeps). The
programming function is activated for 2 minutes.
[4].
Select a free channel by pressing the channel selection button on the monitor.
[5].
Use a fine-tipped object to briefly press the PROG button at the back of the monitor (above the battery housing, no. 19, page 3). The roller
shutter will make an up and down movement (or a series of 8 beeps).
Note:
To clear the programming on the video entry phone on a Somfy roller shutter motorisation, repeat all the steps detailed above.
Emetteur RTS d'origine
Moniteur
1 2 3 4
P1
M
-M+
P2
DC
+
-
Emetteur RTS d'origine
Moniteur
1 2 3 4
P1
M
-M+
P2
DC
+
-
Emetteur RTS d'origine
Moniteur
1 2 3 4
P1
M
-M+
P2
DC
+
-
4
3
5
original RTS transmitter
monitor
Back of control point
Back of remote control
