background image

5

 

Copyright © 2013 Somfy SAS. All rights reserved.

Video door phone - V600 RTS

EN

230V

Sealed unit*

Standard installation

1   2   3   4

1   2   3   4

2 x 0.75 mm² min.

Optional

2-wire

2 x 0.75 mm² min.

distance between the door 

station and the monitor

Cable to be used

Less than 70 m

2-wire 0.5 mm² min.

Between 70 and 100 mm

2-wire 0.75 mm² min.

Note

:  We recommend that, if possible, the video entry phone cables should not be routed through the same sheath as the electric cables. 

The cables are not supplied.

 

door station power plug

The door station power plug can be installed either inside the house or outside, next to the door station.

* You can add a second monitor (ref. 1841206) to your installation - 

max. distance between 2 monitors = 30 m

Important:

 The maximum distance between the monitor and the door station is 100 m.

1   2   3   4

 

Inside the house

Feed 2 additional wires between the door station position and the inside of the house.

 

Outside, next to the door station

Feed the power plug wires into a duct or electric tube and 

install the plug in a sealed unit*.

2-wire

distance between the door station 

and its power plug

Cable to be used

Less than 70 m

2-wire 0.5 mm² min.

Between 70 and 100 mm

2-wire 0.75 mm² min.

Not supplied

Summary of Contents for HOME MOTION V600 RTS



















Reviews: