Copyright © 2013 Somfy SAS. All rights reserved.
8
Video door phone - V600 RTS
EN
800 mA max
*
►
To a door-opener/electric lock
Connect the door station output
on the door station to the door-opener/lock in accordance with the diagram below.
Note:
To connect the door station to another brand of gate motorisation, please refer to the installation guide for that motorisation.
* not provided
Connecting the door station
►
To a gate motorisation
Note:
When the motorisation is solar-powered, the wired controls are deactivated. In this case, you must use the monitor's wireless control to
control your gate motorisation (see page 11).
Connect the door station dry contact output (Com and No) to the dry contact input for the motorisation electronics.
fitting the name-tag
[1].
Press and push on the left-hand side of tag.
[2].
Use a screwdriver to lift and remove the name-tag label protector.
[3].
Write your name on the white label using a permanent marker, then replace the label and its protector in their housing.
Switching the installation on
Once installation is complete, reconnect the gate motorisation to the power supply.
Then connect the monitor and door station power plugs to the electric sockets.
Important:
The monitor power plug must be installed close to the monitor and must be easily accessible.
The door station power plug can be installed inside the house or outside in a sealed unit (see page 5).
Your name
