Commissioning and standard use
22
EN
- EXAVIA installation and operating guide - SOMFY
EN
2
2.4 Closing the control unit
1
2
Affix summary label (g) to the back of the control unit cover.
Close the control unit and screw in the cover.
2.5 Stand-by/Reactivating the control electronics
Once the auto-programming process has been completed, the
electronics automatically switch to standby aer 5 minutes of
inactivity to save energy.
In standby mode, all indicator lights are off.
To check whether the motorisation is switched on or to check/
modify the parameter setting, press the
button for 2 seconds to
reactivate the electronics. The electronics will automatically switch
to standby aer 5 minutes of inactivity.
2.6 Opening and closing the gate completely
Button 1
• Gate closed:
press button 1 on the remote control to open the
gate fully.
STOP
• Gate moving:
Press button 1 on the remote control to stop
the gate.
• Gate open:
Press button 1 on the remote control to close the
gate.
2.7 Obstacle detection
If an obstacle is detected (abnormal force on the motorisation):
• when the gate is opening
: the gate stops.
• when the gate is closing
: the gate stops and re-opens.
2.8 User training
All users must be trained in how to safely use this motorised gate (standard use and unlocking principle) and in the mandatory periodic
checks.
The remote controls supplied with the kit are already memorised and programmed so
that button 1 on the remote controls activates complete opening of the gate.
