Installation
13
EN
- EXAVIA installation and operating guide - SOMFY
EN
1
1.2 Fastening the pillar brackets
Marking the AM and AH axes
1.
Transfer dimension B onto the pillar using the hinge axis and mark
a vertical axis AM on the pillar.
2.
Mark the horizontal axis AH on the pillar, halfway up the rein-
forcement.
AH
Drilling the pillars
1
Position the bracket in direction e or E defined in step 2 of
measuring the dimensions (see page 12)
Direction E
Direction E
or
or
Le-hand pillar
Right-hand pillar
Direction E
Direction E
Take care to ensure the bracket is fitted the right way up.
Correct orientation
Incorrect orientation
AH
Align the markings made on the bracket with the AH axis and
align the edge of the bracket with the AM axis.
Note:
The markers marked on the bracket are underneath the
oblong holes.
2
3
Check that the bracket is horizontal, then mark the mounting
holes for the bracket.
Drill 3 holes in each pillar at the marked locations (see page
11 for the drilling diameter corresponding to suitable
hardware).
Check before proceeding to the next step
Have you marked the AM and AH axes?
