2
Thank you for purchasing a SOLZAIMA appliance.
Please read this manual carefully and retain it for future reference.
* All products here detailed meet the requirements of the EU Construction Products Regulation
(No. 305/2011) and bear the
EC
conformity marking;
*
SOLZAIMA
disclaims any responsibility for damage to the unit when installed by non-qualified
personnel;
* SOLZAIMA disclaims any responsibility for damage to units not installed and operated in
compliance with the instructions included in this manual;
* • All local regulations, including but not limited to national and European standards, must be
observed when installing, operating and servicing the unit;
* SOLZAIMA
free standing fire units
are tested and found to be in compliance with the EN
13240:2002
+
EN
13240:2002/A2:2005
+
EN
13240:2002/AC:2006
+
EN
13240:2002/A2:2005/AC:2006 standards;
* Technical support is normally provided by SOLZAIMA, except in special cases to be determined
by the installer or support technician;
* For assistance, please contact the unit’s supplier or installer. Please provide the unit serial
number, which can be found on the identification plate located on the back of the unit, as well as
on the sticker posted on the back cover of this manual.
You may contact us via email, using the following address:
.
Summary of Contents for TEK Basic
