63
Warranty Period, namely the proof of purchase or other document supporting the
purchase. In any case, the document certifying that the Product is in the Warranty
Period must include the identification of the Product (as per clause 2 above) and the
date of purchase Alternatively, and to make the Product Warranty valid, the Client may
provide the PSR - the certifying document of the unit start-up (when applicable).
3.5 The Product must be installed by a specialized technician, qualified to install the
Product in compliance with the regulations applicable in the Client's geography, namely
those regarding the chimney, as well as other applicable regulations concerning water
supply, power supply and/or other utilities related to the use of the equipment or
sector, as described in the Instruction Manual. This Warranty shall be void in case of
non-compliance of the Product installation with the manufacturer’s specifications
and/or any applicable law in force. Should be Product be installed on the exterior of a
building, it must be protected from weather conditions, namely rain and wind. In this
case, it may be necessary to protect the unit with a cabinet or a protection box
properly ventilated.
3.6 The units cannot be installed in locations with chemicals agents in the atmosphere,
in saline or high humidity environments. The combination of these agents with oxygen
(air) may cause the quick corrosion of the combustion chamber to. In these
environments, it is recommended that the units are protected with proper anticorrosion
products, specially between periods of usage. We recommend the application of
graphite wax specific for high temperatures to lubricate and protect the unit from
corrosion.
3.7 For the equipments that use pellets, in addition to the daily and weekly
maintenance procedures described in the Instruction Manual, it is also mandatory to
clean the interior of the unit, as well as the fume exhaust chimney. These operations
should be performed at every 600-800 kg of used pellets for Free Standing Fire units
(air and water models) and Compact Boilers, and at every 2000-3000 kg of used
pellets for Automatic Boilers. If the used quantity of pellets is under these Figures, at
least a thorough preventive maintenance operation must be performed annually.
3.8 The Buyer is responsible for the execution of the periodic maintenance operations,
as set forth in the Product’s instruction and handling manuals provided with the unit.
When requested, a proof of maintenance must be produced, which includes the
Summary of Contents for Douro 12kW
