SOLZAIMA Douro 12kW, Instruction Manual

Page: 60 / 76

59
Figure 44 – Performance of the pump
Note: the pump is configured as standard at full capacity (75-100%).
Changing the setting of the pump
Can be chosen between the the view of the performance of pump and th view of
settings, just press the button once.
If you need to change the pump performance, you must press the button for 2 seconds
(see Figure 45), after this action the LEDs start blinking, then you must press the
button until the desired setting (see Table 5), after 10 seconds the display
automatically switches to the view of performance with alteration saved.
Figure 46 – Pump settings
Altura manométrica
máxima (m)
Configuración
2-4
3-5
4-6
5-7
Table 5 – Pump settings