SOLZAIMA Douro 12kW, Instruction Manual

Page: 40 / 76

39
a) b)
Figure 20 – Wireless remote command connection
For the wired remote control, the black and grey wires must be connected to the
receiver as shown in the following figure.
Figure 21
– Wired remote command connection
12.1. Instructions for remote control assembly
1 – Turn off the equipment at the main power switch and remove the right-hand side of
the pellet-run boiler.
2 – Remove the unit's terminals phase (F) and neutral (N).
a)
3 – Rivet the terminals of the 220V wire supplying power the transmitter.
Colour codes:
CN - grey
N - black
C - brown
A - blue