65
15.3.
Additional cleaning
For each 600-800 kg of pellets consumed, additional cleaning should be performed.
This type of cleaning is to be done with the equipment extracted from the wall to
have access to all the elements.
- To extract the equipment, it must be cooled and disconnected from the electrical
current.
- Open the outside door to the left, remove the screws securing the bottom cover
with an Allen key Nº 5 and the screws securing the body to the chassis using an
Allen key Nº 6.
- Then grab the handles which are at half height (as shown in the following figure),
and remove the equipment from the wall with some care, since the body is
hydraulically and electrically connected.
Figure 48 – Removing the equipment from the cabin
Summary of Contents for Atlantic
