SOLZAIMA Atlantic, Instruction Manual

Page: 36 / 105

35
10. Using the pellet insert and recommendations
Before starting up the unit, please check the following:

Make sure that the unit is properly connected to the power mains using the
230VAC power cable.
Figure 31 – Electric power plug

Check that there are pellets in the tank.

Make sure before each ignition that the burner is clean.

Certifique-se o circuito hidráulico foi montado e ligado à água.

Make sure that the hydraulic circuit has been mounted correctly and is
connected to the water.

Make sure that the air circulation in the room where the installation is located is
sufficient, otherwise the equipment will not work properly. For this reason, pay
attention to whether there is other heating equipment in the room that consume air
for their operation (e.g. gas equipment, braziers, extractors); simultaneous
operation of these equipment is not recommended.
The combustion chamber of the insert is made of steel sheet painted
with high temperature ink, which releases fumes in the first burns due to
the cure of the ink.