SOLZAIMA Atlantic, Instruction Manual

Page: 19 / 105

18
6.6. Sliding door assembly

Installing the door will be easier if there is space between the body and the
wall, so you can see the joint between the guides. Make sure the guides are fully
retracted.
Figure 11 – Sliding door installation

Match the parts that are attached to the door to the inside of the guides that
are attached to the machine ring and slide carefully to the right. Before releasing
the door completely, make sure that both the upper and lower guides have engaged
properly, if not, return to the starting position and try again. Check that the part of
the guide that is on the door, slides on the inside of the guide that is on the frame.
If for any reason you need to remove the door, the guides have a small plastic tab,
which, when operated, allows the guide to be separated again into 2 parts.
Figure 12 – Sliding door installation