74
- Failures
Failures
“Service” (Maintenance)
Air probe failure
Low pellet level
The door is open
Air temperature probe failure
Water temperature probe failure
Water pressure sensor fault
Water pressure close to out of operating range
Table 3 - List of failures
Important notice: A “
service
” warning on the display (maintenance due)
indicates that the unit has exceeded 2100 operating hours. In this case, the client
must perform the unit's maintenance procedure (following the instruction on the
Technical Manual). Once this procedure is completed the hour meter may be reset,
to clear the waning message. This message does not impact the normal operation
of the unit. It is simply a warning.
Important notice: The errors can be reset only when the error information is
flashing on the display. To reset the error, press the ”Mode” button once while
displaying the error.
WARNING!
In case of an emergency, turn off the unit by following the normal shutdown
procedure.
WARNING!
THE UNIT BECOMES HOT DURING OPERATION SO CARE MUST BE TAKEN
ESPECIALLY WHEN HANDLING THE DOOR GLASS AND DOOR HANDLE.
Summary of Contents for Atlantic
