45
Press "set" again and when flashing, press the "+" or "-" keys to select "On" or
"Off". Press "ok" to confirm your choice.
Repeat the above steps for programmes P2 to P6.
To
activate Timer mode
, press "esc" once and then "-" until you find the
"Activation" menu, press the "set" key and it starts flashing, press the "+" or "-"
key to select "On" or "Off", press "ok" to confirm your choice. Press the "esc" key
once and then press the "+" key once to move to the "Sleep" menu.
Note:
- Once the programmes are set, remember to enable them on the
"Habilitações" (Activation) menu.
- There can only be one enabled profile in the Timer, either weekly or daily
(they do not operate simultaneously).
- When the Timer is enabled, the following message "Timer prog" can be
checked on the display.
Summary of Contents for Atlantic
