48
10. Installation of the optional UPS connection Safety Kit
a)
b)
Figure 32
– a) example of UPS (not included in the kit); b) UPS kit components
To connect the kit to a UPS, proceed as shown in the following figures.
First, remove the side cover to access the electronic plate (Figure 39-a). Then, assemble
the UPS electronic module near the unit's electronic plate with the correct wires
connected to the plate
(Figure 33-b and c). Then remove the plate fixed with microjoints from the back of the
unit (Figure 33-d) and place the connector to connect the UPS in that location (
Erro! A
origem da referência não foi encontrada.
-e). Finally, make the electrical connections
(
Erro! A origem da referência não foi encontrada.
-g).
Never connect the UPS electronic module when the power of the unit is turned on.
a)
Summary of Contents for Alpes 10 kW
