12
4.1. Assembly of removable parts
After the installation, the Free Standing Fire unit should be fitted with the removable
covers.
Air model - Alpes 8kW and Alpes 10kW
- Top front cover
The following figure shows how to assemble the top front cover. First, remove the two
screws located at the top of the unit (Figure 9-a). Then insert the part (Figure 9-b) with
the lower notches (Figure 9-c) to facilitate the attachment to the unit ( Figure 9-d). Insert
the part by pressing down on it until it clicks into place. Finally, replace and tighten the
two screws (Figure 9-e).
a)
b)
c)
d)
Summary of Contents for Alpes 10 kW
