Solare Datensysteme Solar-Log 1000 User Manual Download

Page: 121 / 131

Cleaning and care

Solar-Log

1000

User Manual

121 of 131

Cleaning and care

8.1 Cleaning tips

Caution

Be sure to unplug the device prior to cleaning it!



Clean the device on the outside only with a dry, lint-free cloth.



If very dirty, the device can be cleaned with a slightly damp cloth and

a commercially available household cleaner.

Caution

When cleaning, ensure that no moisture enters the device!

8.2 Care tips



Ensure that the device is not exposed to any moisture at the location

where it is kept.



Ensure that the device is not exposed to any heat or strong sunlight

at the location where it is stored.
Please take note of the Technical Data (



page 127).

Summary of Contents for Solar-Log 1000




































































































































Search results

Summary of Contents for Solar-Log 1000

Reviews:

Related manuals for Solar-Log 1000

Brands by name

Popular brands

Solare Datensysteme Solar-Log 1000, User Manual

Search results

Summary of Contents for Solar-Log 1000

Reviews:

Related manuals for Solar-Log 1000

Brands by name

Popular brands