Solare Datensysteme Solar-Log 1000 User Manual Download

Page: 125 / 131

Malfunctions

Solar-Log

1000

User Manual

125 of 131

Performing a restart

Press the reset button e.g. with an open paper clip.



LED 1 goes out.

Release the reset button.



After approx. 5 seconds LED 1 illuminates again.



After approx. 20 seconds LED 1 and LED 2 start to flash, the

device restarts with the set values.

Wait until normal operation has recommenced and then

close the cover.

Caution

Do not perform a restart by pulling out the power plug!

9.2.1 Obtaining information from the internet

You can also obtain support for operating the device or the settings on
our internet site under the following URL:

http://www.solar-log.com/en/service-support/technical-support.html

Here you will also find additional product information and manuals
available for download.

9.2.2 Informing a specialist technician

Should problems occur with the Solar-Log

1000

that are not able to be

remedied using them measures described, we recommend that you
contact your solar technician or our customer service.

The contact addresses for our customer service can be found on the
back of the envelope.

Summary of Contents for Solar-Log 1000




































































































































Search results

Summary of Contents for Solar-Log 1000

Reviews:

Related manuals for Solar-Log 1000

Brands by name

Popular brands

Solare Datensysteme Solar-Log 1000, User Manual

Search results

Summary of Contents for Solar-Log 1000

Reviews:

Related manuals for Solar-Log 1000

Brands by name

Popular brands