38
© Solarbayer GmbH [02.16]
PRODUCT INFORMATION
Wood log boiler HVS
Oper
a
tion
Refueling
79
°
C
07:16
79.2
°
C
λ
Heating mode
The control LED is green
If you want to switch to the refueling mode you have to press „ENTER”
79
°
C
07:16
46.2
°
C
λ
OFF
Refuel – select –
select parameter
OFF
boiler can be switched off manually
refuel
⌧
cancel and return
▲▼
select the values that are going to be displayed
ON
25 kW
46.2
°
C
300s
λ
+60
0
Refuel
The exhaust gas fan, if one is installed, is activated automatically.
The forced draft fan will be deactivated.
The opening of the boiler door will be displayed on the control panel.
select parameter
+60
elongate running time of the fan
(only when installed)
start boiler
0
turn off exhaust gas fan
(only when installed)
▲▼
select the values that are going to be displayed
ON
07:16
25.0
°
C
λ
Heating mode begins
The boiler is in heating up mode as long as the temperature is lower than the
pre‐set boiler shut down temperature
plus additional
20°C
Note: If the temperature does not cross this mark in between 30 minutes the
boiler will automatically turn to
end
90
°
C
λ
END
79
°
C
07:16
79.2
°
C
λ
Heating mode
After several minutes the boiler turns to heating mode when the shut down
temperature is exceeded by approx. 20°C
Note: The pump starts at a boiler temperature of approx. 40°C.
end
90
°
C
λ
Set the draft bar to the position
„open/heating‐up”
before refueling.
After having closed the boiler door set the draft bar to the position
„close/normal heating mode“
Summary of Contents for HVS 100 E
Page 13: ... Solarbayer GmbH 02 16 13 PRODUCT INFORMATION Wood log boiler HVS Installation Installation ...
Page 25: ... Solarbayer GmbH 02 16 25 PRODUCT INFORMATION Wood log boiler HVS Operation Operation ...
Page 41: ... Solarbayer GmbH 02 16 41 PRODUCT INFORMATION Wood log boiler HVS Maintenance Maintenance ...