Solarbayer HVS 100 E, Instruction Manual

Page: 8 / 68

8
© Solarbayer GmbH [02.16]
PRODUCT INFORMATION Wood log boiler HVS
Gener
al In
forma
tion
Complete combustion of the
wood gases in the lower
combustion chamber
Sectional model
1 Control unit
graphic display with permanent
presentation of the system’s operating
status
2 Fuel chamber door
large‐size fuel chamber door
3 Forced draught fan
the quantity of air, necessary for a
perfect combustion, is supplied by the
infinitely variable forced draught fan
equipped as standard
4 Bottom door
cleaning door for the removal of ash
5 Fuel chamber
large fuel chamber (0,5m up to 1m logs,
depending on boiler size)
5a Conical fuel chamber walls*
for a steady inlet of embers to the
ceramic nozzle
6 Primary air duct
pre‐heated primary air is lead into the
fuel chamber by the rear air duct
7 Ceramic nozzle with secondary air duct
creates the perfect gas mixture and
guarantees a clean downward wood gas
flame
8 Slide‐in combustion chamber
with high temperature resistant fireclay
bricks for a complete burnout of the
wood gases
9 Exhaust gas heat exchanger with
turbulators
for best possible hand‐over of exhaust
gas heat to the heating water
10 Exhaust gas damper with draft bar
prevents outlet of flue gas when
refueling the boiler
11 Safety heat exchanger
for cooling down in case of
overheating
12 Boiler flow line
2
3
4
6
8
5
9
12
11
10
1
7
A
5a
1
A Lambda servo motor (only with HVS LC)
The secondary air is adjusted by the lambda sensor via a
servo motor, depending on the emission values.
With the boiler series HVS E (without lambda control) the
secondary is adjusted via regulating screws.
Graphic display with pre‐defined
Solarbayer hydraulic scheme.
sectional model shoes HVS LC
*only with HVS 16, HVS 25 and HVS 40