SolarAttic PCS1, User Manual

Page: 37 / 116

SECTION 3 - INSTALLATION Page S3-3
Suggested Tool Lists
INSTALLATION TOOLS
Cable Hoist/Puller tool (used to raise PCS1 into attic)
Reciprocating Saw (used to enlarge a closet access to attic space)
Circular Saw
Hacksaw
Hammer
PVC pipe cutting tool (otherwise use hacksaw)
Screwdriver(s)
Ladder(s)
Flashlight
Other forms of lighting (for use in attic)
Wire brush (cleaning manifold pipe threads if needed)
Other tools as dictated by the installation
SERVICE TOOLS
Electric Screwdriver
Fin Comb Tool for straightening out bent fins
[Watsco Part No P-8 or equivalent for a 10 fin per inch coil]
Torque Wrench
[For re-torquing fan bolt to 150 in lbs if removed]
Loctite
[For re-loctiting fan bolt if removed]
Standard medium flat blade hand screwdriver [1/4Ó blade width]
[For 10-24 x 1/2Ó Float bracket screws on venturi]
[For 10-24 x 1/2Ó Capacitor bracket screws on venturi]
5/16Ó Socket or spin nut driver
[For cabinet sheet metal screws]
5/16Ó Box & open end wrench
[For Fan blade bolt]
3/8Ó Box & open end wrench
[For 10-24Ó Nut on float bracket & capacitor bracket nuts]
1/2Ó Box & open end wrench
[For Float removal from float bracket]
[For Motor band mounting bolt]
[For Motor arm to venturi mounting bolt nuts]
9/16Ó Box & open end wrench
[For Motor band mounting bolt nut]
SERVICE NOTE: Replace any worn or loose 5/16Ó Hex head #10 x 1/2Ó sheet metal
screw with a 5/16Ó Hex head #12 x 1/2Ó sheet metal screw. This is a common
hardware store item. A #10 screw can become loose with repeated removal.