PSS-G/RAID Alternative Energy System Deployment Guide
August 2020
|
Solar Stik
®
Inc.
30
|
Critical information about setup and operation of the AES with the PSS-G/RAID can be found on
Information Plates (I-Plates) and on the Faceplates of the AES components, such as the PRO-Verter
and the Power Hub. The I-Plates provide quick access to relevant data, including setup connections,
programming, operation warnings, and more.
Corresponding to the information on the I-Plates, all Inter-Connect ports on the AES components are
labeled with placards indicating their preferred connections for best overall AES function.
Please review all of the information on the I-Plates, Faceplates, and placards before setting up the
AES.
Figure 7. The PRO-Verter
7000 I-Plate
NOTICE
The Inter-Connect network is a polarized, protected circuit, and it is SAFE to make any connection at
any port. However, the ability of the PRO-Verter and the Power Hub to effectively monitor and meter
the power as it flows through the System may be compromised if the recommended connections are
not followed. Please refer to the setup diagram on the I-Plates for additional information.
Information Plates (I-Plates), Faceplates, and Placards
