55
13. RESECTION MEASUREMENT
Only Z (height) of an instrument station is determined by the measurement.
• Known points must be measured by distance measurement only.
• Between 1 and 10 known points can be measured.
X
PROCEDURE
1. In the second page of Meas mode
screen, press
[MENU]
, then select
"Resection".
2. Select “Elevation” and press
[EDIT]
to input the known point.
After setting the elevation for the
first known point, press
{
L
}
to
move to the second point.
When all required known points
have been set, press
[MEAS]
.
• Press
{
K
}
to return to the
previous known point.
3. Sight the first known point and
press
[OBS]
to begin
measurement.
The measurement results are
displayed on the screen.
4. Press
[YES]
to use the
measurement results of the first
known point.
5. If measuring two or more known
points, repeat procedures 3 to 4 in
the same way from the second
point.
When the minimum quantity of
observation data required for the
calculation is present,
[CALC]
is
displayed.
13.2
Height Resection Measurement
1 0 t h P t .
Z p :
T g t . h :
0 . 1 0 0 m
1 1 . 8 9 1
READ
REC
EDIT
MEAS
Resection.
NEZ
Elevation
R e s e c t i o n 1 0 t h P t .
Z
1 1 . 7 1 8
O B S
30R.book 55
ページ
２００３年１２月１６日 火曜日 午後５時１５分
Summary of Contents for 30R Series
