Sokkia 30R Series, Operator'S Manual, Page: 48 / 178

11. DISTANCE MEASUREMENT
40
3. Press [STOP] to quit distance
measurement.
• Each time [ M
M M
M SHV] is pressed,
S (Slope distance), H (Horizontal
distance) and V (Height
difference) are displayed
alternately.
$
• If the single measurement mode is selected, measurement automatically stops
after a single measurement.
• During fine average measurement, the distance data is displayed as S-1, S-2,
... to S-9. When the designated number of measurements has been completed,
the average value of the distance is displayed in the [S-A] line.
• The distance and angle that are most recently measured remain stored in the
memory until the power is off and can be displayed at any time.
C
"11.3 Recalling the Measured Data"
The distance and angle that are most recently measured remain stored in the
memory until the power is off and can be displayed at any time.
The distance measurement value, vertical angle, horizontal angle, and the
coordinates can be displayed. Distance measurement values converted into the
horizontal distance, elevation difference, and the slope distance can also be
displayed.
X
PROCEDURE
1. Allocate the [RCL] softkey to the
Meas mode screen.
C
"24.2 Allocating Key Functions"
11.3 Recalling the Measured Data
30R.book 40 ページ ２００３年１２月１６日 火曜日 午後５時１５分