Sokkia 30R Series, Operator'S Manual, Page: 49 / 178

41
11. DISTANCE MEASUREMENT
2. Press [RCL] .
The stored data that is most
recently measured is displayed.
• If you have pressed [ M
M M
M SHV]
beforehand, the distance values
are converted into the horizontal
distance, elevation difference,
and the slope distance and
recalled.
3. Press {ESC} to return to Meas mode.
The following explains distance measurement and the features used to output
measurement data to a computer or peripheral equipment.
C
Communication cables: "27.2 Optional Accessories"
Output format and command operations: “Interfacing with the SOKKIA SDR
Electronic Field Book” and “Command Explanations” manuals.
X
PROCEDURE
1. Connect SET and host computer.
2. Allocate the [D-OUT] softkey to
the Meas mode screen.
C
"24.2 Allocating Key
Functions"
3. Sight the target point.
4. Press [D-OUT] , and select “Dist
data” to measure the distance and
output the data to peripheral
equipment.
5. Press [STOP] to stop outputting
data and return to Meas Mode.
11.4 Distance Measurement and Outputting the Data
30R.book 41 ページ ２００３年１２月１６日 火曜日 午後５時１５分