SUNSYS HES L - 551697A - SOCOMEC
40
EN
7.4. Installation with more than 1 C-Cab (one Master and one Extension)
Start from the cabinet on the right, position the drilling template of the C-Cab and mark the 6 holes – 4x note “1” and 2x
note “c-cab2” - as shown below.
3
3
2
2
1
1
1
1
c-cab2
REAR
FRONT
c-cab2
Holes to drill
Figure 35. Holes to drill for 1 C-Cab + 1 C-Cab ext. installation
Then put the drilling plate as shown below, overlapping 2 holes – note “1” - that you already marked and mark 2 note “1”
additional ones:
3
3
2
2
1
1
1
1
c-cab2
REAR
FRONT
c-cab2
3
2
2
1
1
1
1
c-cab2
REAR
FRONT
c-cab2
Holes to drill
Position the
drilling template
superposing left
holes with those
holes
Figure 36. Holes to drill for the C-Cab installation
Then prepare the B-Cab installation by marking 3 more holes -note “2”, as shown below.
3
3
2
2
1
1
1
1
c-cab2
REAR
FRONT
c-cab2
Holes to drill
Figure 37. Holes to prepare B-Cab installation next to the C-Cab.
