NETYS RT 5 - 7 - 9 - 11 kVA - 551570A - SOCOMEC
91
EN
10.3.7. Installation of Lithium-ion Battery Module
1. The lithium-ion battery module is optional. Please see
Figure 10-27
for
its appearance.
2. One or two lithium-ion battery modules are required, depending on the
discharging time you need.
(Figure 10-27: Lithium-ion Battery Module)
To install the lithium-ion battery module in the lithium-ion battery pack, please
follow the steps
❶
to
❹
shown in
Figure 10-28
.
Step
❶
: Remove the screws and remove the battery pack’s front bezel.
Step
❷
: Use the Phillips screwdriver to remove the screws on the protective
cover on front of the battery module.
Step
❸
: Remove the protective cover.
Step
❹
: Extract the used battery module from the left battery compartment and
then insert a new one.
