6 | CHAPTER 3: WINDOWS CE SETUP
Chapter 2
Preliminary Setup
This section explains the first three steps of DPC setup, which are done
similarly for all Windows versions. After performing the steps covered here,
complete DPC setup by proceeding to Part II. Find the section for your
specific Windows version.
The four steps covered in Part I include:
•
Registering your card
•
Activating data service for your mobile phone
•
Network Information Form
STEP 1: Register Your Card
Register your DPC online at
www.socketcom.com/product/prodreg.htm.
You can also use the product registration form included in your DPC
package.
STEP 2: Activate Data Service for Your Phone
Some mobile phone carriers activate data service only when requested and
may charge small fees. If necessary, ask your phone carrier for this feature.
Important! If data service is not activated for your mobile
phone, then you will not be able to use your phone for
any data connections!
STEP 3: Uninstall Old Socket DPC Software
Delete any DPC software you may have previously installed on your mobile
computer. See the README on the installation CD for uninstall procedures.
