CHAPTER 5: WINDOWS 9x/Me SETUP | 21
Chapter 5
Windows 9x/Me Setup
This section covers the latter part of the setup for Windows 9x/Me. For
Steps 1-4, refer to Chapter 2, “Preliminary Setup.”
STEP 5: Insert the Installation CD
Insert the installation CD into the CD drive of your notebook computer.
STEP 6: Insert the Card and Attach the Phone
1. Plug the DPC into the PC Card adapter, with the purple label on top.
Do NOT insert the DPC upside down, or damage may occur.
2. With the notebook computer turned ON, insert the combined unit into
the PC Card slot. Windows notebooks in most cases will signal that the
DPC has been properly inserted via a beep, task tray icon and/or
message screen.
3. Connect the free end of the data cable to the data part of the mobile
phone. The data port is typically on the bottom or side of the mobile
phone and usually is the same port used to charge the phone.
Insert the DPC
into the adapter
with the card’s
colorful label
on top.
