CHAPTER 4: ADVANCED FEATURES | 39
Set up Your Bluetooth Card
Note: If you use the Get Connected! Wizard, which is recommended for
normal usage, then this step is not necessary. This step would be used to
change the friendly name of your mobile computer.
1. After you insert the Bluetooth Card, the Bluetooth icon
should
appear in the task tray (visible from the
Today
screen for Pocket PCs).
Tap on the icon.
2. In the pop-up menu, select
Advanced Features,
then
My Bluetooth
Device
.
3. In the
My Bluetooth Device
screen, you can modify the
Friendly Name
and make any desired configuration changes. When done, tap
OK
.
Note:
•
In normal phone connect operation,
Discoverable
mode is not needed
and should be disabled.
•
If you do enable
Discoverable
mode (e.g., for ActiveSync), note that it
does not shut off by itself. To save power, remember to disable it
when not needed.
•
Connectable
,
Use Authentication
, and
Use Encryption
are also not
required for printing or dial-up networking applications.
Note: If you installed
Socket OBEX, the
menu will also list
Transfer via Bluetooth.
