89
SDIO Card
The Socket Bluetooth Card is designed to be compliant with the rules and
regulations in locations where they are sold and will be labeled as required.
This product is type approved — users are not required to obtain license or
authorization before using.
This product has been certified as conforming to technological standards.
Therefore, the following actions are punishable by law:
•
Disassembly or modification of this product.
•
Removal of identification labels on the back of this product.
The frequency used by this product is also used by industry, scientific and
medical devices, such as microwave ovens, as well as wireless detectors for
motion detectors, such as those requiring licenses used on manufacturing
lines or similar radio transmitters. (all these wireless devices will be called
“other wireless transmitters” below).
1. Before using this system, confirm that other wireless transmitters are
not in use nearby.
2. In the unlikely event that there is electronic interference between this
system and other wireless transmitters, quickly change the operating
frequency of this system, change the location of operation, or stop
operating the unit (cease signal transmission).
3. If other electrical interference or related problems should occur, contact
Socket technical support at +1-510-744-2720.
Radio Frequency Interference Requirements (FCC)
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Change or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Radio Frequency Exposure Compliance:
In order for this device to comply with FCC rules, under the provision of
Part 15.247(b)(c), it must operate in a manner that ensures that the public is
not exposed to radio frequency energy levels in excess of the Maximum
Permissible Exposure (MPE) limits.
It is recommended that the antenna of this device be placed at least 20 cm
or more from its user and any nearby persons, during continuous and
extended data transmission. The users of this device should ensure that the
operation of this device is in compliance with these provisions.
