CHAPTER 2: BASIC SETUP | 25
•
If you did not save the dial-up password, the
Network Log On
screen may appear. Enter the
Password
and tap
OK
.
c) When the Pocket PC starts calling, you should see the call status on
both the Pocket PC screen and phone display. After the Pocket PC
connects, it will receive/transmit the information as requested (e.g.,
Pocket Internet Explorer will display the requested website).
Connection
icon: (Navigation bar at top of screen)
Indicates an active dial-up or network connection
d) To use a different Bluetooth enabled phone for dial-up networking,
you can use the same connection setup, but you must make the new
phone your favorite. Just run the
Get Connected! Wizard
again,
select the new phone, and make it your new
Favorite
when
prompted.
Alternatively, you can use the Bluetooth Devices folder to change
your favorite phone (see Chapter 4 for instructions).
