34 | CHAPTER 3: FEATURES
SCENARIO #3: Your Bluetooth Devices folder has no access points.
(a) When you tap Bluetooth LAN Access, the mobile computer will
automatically begin to search for new Bluetooth devices.
Note: You can also start the device search by tapping
Find
in the
Bluetooth Devices screen. See Scenario #2 on the previous page.
(b) After the search is complete, select the access point you wish to connect
to. Tap
Select
. If the access point is not listed, tap
Refresh
to search again.
(c) After you tap Select, a service discovery phase will begin.
(d) If the LAN requires a Passkey, a screen will appear, asking for the
Passkey. Enter the passkey, then tap
ok
.
(e) After a successful connection is made, the screen will report
Connected
.
If you would like to
save the new access
point to your
Bluetooth Devices
manager, check
Save
selection for future use
.
