22 | CHAPTER 2: BASIC SETUP
METHOD 1: TAP ON THE CONNECTION ICON
a) Tap on the Connection icon in the navigation bar at the top
of the screen. It should have an “X” to show that you are
not connected.
b) A bubble should appear with the dial-up connection you just created.
Verify the phone number, then tap on the phone number. The phone
will try to connect.
Note:
•
Multiple connections may be listed. Tap on the phone number of the
connection you want to dial.
•
If the connection you want is not listed, tap on
Settings
. Tap
Manage
Existing Connections
and select the connection you want to use. Tap
ok
.
c) Depending on your phone and connection settings, you may need to
enter a passkey and/or a password before the phone will start to dial:
•
If you have a
Nokia 3650/6310/7650/8910/8910i
or
Motorola
Timeport 270C
, you must complete the bonding process:
a. The first time you try to connect, the phone will ask if you
want to bond. On Motorola, enter
GRANT;
on Nokia
,
enter
ACCEPT
.
b. Make up a 4-16 digit passkey, enter it on the phone, then enter
it on the Pocket PC.
c. After successfully bonding with your phone, you may want to
set up your phone for automatic connections. See Appendix C,
“Automatic Phone Connections,” for instructions.
