Page 2 - 11
TL49J
CONTROLS/PRE-OPERATION
PRE-OPERATION SAFETY INSPECTION
Perform a pre start inspection at the beginning of each shift before using the aerial platform on the job.
The inspection site must have a smooth and level surface.
!
W A R N I N G
!
DO NOT
operate the aerial platform if it is damaged or malfunctioning
OPERATOR’S MANUAL
The manual holder is located underneath the platform controls on the platform (refer to Figure 2-4).
Figure 2-4 –
Operator’s Manual Holder
To inspect the operator’s manual and manual holder:
1. Make certain the Operator’s Manual holder is securely fastened in place.
2. Check to see that the proper Operator’s Manual is in the holder.
3. Check to see that the manual is complete with all pages intact and in readable condition.
ELECTRICAL SYSTEM
Electrical power is supplied from four, 6 volt batteries. The batteries supply 24 volt DC electrical power
to operate the aerial platform control system. The battery tray is located on the left side of the aerial
platform.
!
W A R N I N G
!
DO NOT
not smoke or permit op
en flames or sparks when checking the
batteries.
Manual Holder
